Oil Products

Base oils

Properties	I-12A	I-20A	I-40A	I-50A
Properties	Standard	Standard	Standard	Standard
Kinematic viscosity at 40°C, mm2/s	13 – 17	29 – 35	61 – 75	90 – 110
Density at 20ºC, kg/m3 Density at 15ºC, kg/m3	880	890	900	910
Antioxidant stability: Acid number increase, MgKOH/ 1 g, max. Tar increase, %, max.	0,20 1,50	0,30 2,00	0,40 3,00	0,40 3,00
Acid number, mg KOH/1g lubricant, max.	0,02	0,03	0,05	0,05
Ash content, % max.	0,005	0,005	0,005	0,005
Mechanical impurities content	None	None	None	None
Water content, %, max.	Traces	Traces	Traces	Traces
Flash temperature in opened melting pot, ºC, min.	170	200	220	225
Solidification temperature, °C, max.	-15	-15	-15	-10
Colour CNT, max.	1,5	2,0	3,0	4,5
Sulphur mass content, %, max.	1,0	1,0	1,1	1,1
Content of selected solvents	None	None	None	None

Slack wax is used in different sectors of industry for various products, e.g. for the production of candles, polishers, matches, inks, briquettes, chalky paper, tent-cloth coating, composite wood fiber panels.

1. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	44.0 – 50.0
Oil content, %	ASTM D721	5.0 – 10.0
Kinematic viscosity, mm2/s	ASTM D445	2.00 – 3.50

2. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	50.0 – 55.0
Oil content, %	ASTM D721	5.0 – 10.0
Kinematic viscosity, mm2/s	ASTM D445	3.00 – 3.90

3. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	50.0 – 56.0
Oil content, %	ASTM D721	6.0 – 11.0
Kinematic viscosity, mm2/s	ASTM D445	4.00 – 5.50

4. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	48.0 – 55.0
Oil content, %	ASTM D721	10.0 – 15.0
Kinematic viscosity, mm2/s	ASTM D445	4.00 – 4.50

5. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	47.0 – 52.0
Oil content, %	ASTM D721	10.0 – 15.0
Kinematic viscosity, mm2/s	ASTM D445	3.00 – 3.50

6. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	50.0 – 58.0
Oil content, %	ASTM D721	10.0 – 15.0
Kinematic viscosity, mm2/s	ASTM D445	4.00 – 6.00

7. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Melting point, °C	–	35.0 – 65.0
Oil content, %	ASTM D721	12.0 – 30.0
Kinematic viscosity, mm2/s	ASTM D445	4.00 – 8.00

8. Slack wax

Parameter, Unit	Standard	Spec
Color, Saybolt	ASTM D156	-16
Color, Saybolt	–	57.0 – 65.0
Oil content, %	ASTM D721	Max 16
Kinematic viscosity, mm2/s	ASTM D445	5.00 – 8.00

9. Slack wax

Color, Saybolt	ASTM D156	-16
Color, Saybolt	–	57.0 – 65.0
Oil content, %	ASTM D721	Max 16
Kinematic viscosity, mm2/s	ASTM D445	6.00 – 8.00

Fully refined paraffin

Fully refined paraffin is used in home candles production also for impregnating the packaging of foodstuffs and their flexible coating; preserve elasticity also at lower temperature; is also used for the storage of foodstuffs intended for the coating of wooden, concrete and metal containers, as well as for the production of different products containing wax, medical equipment and cosmetics.

Paraffin U-2 (briquettes)

Parameter, Unit	Standard
Appearance	White color crystal mass
Melting temperature, °C, min	52,0
Oil mass content, %, max	0,80
Color, relative sorts, max	4
Odour	None
Benzopyren content	None
Sulphur mass content, %, max	None
Water mass content, %, max	None
Mechanical impurities content	None
Phenol content	None
Formaldehyde content	None
Water soluble acid and alkaline content	None

Paraffin U-2 with RAL certificate (granules, flakes, briquettes, liquid)

Parameter, Unit	Standart
Appearance	White color crystal mass
Melting temperature, °C, min	53.00
Oil mass content, %, max	0.80
Color, relative sorts, max	+24 – +30
Odor, max	1.0
Sulphur mass content, %, max	20.0
Penetration at 25 °C, 0,1 mm, max	20
Ash content, %, max	0,05
Polycyclic aromatics, 1/cm	Pass
Residual solvent, ppm, max: – benzene – toluene	0,5 2,0
Benzpyrene content, %	None
Water content, %	None

Other paraffin products

Other paraffin products are used in various industries.

Protective wax JAW-1 (briquettes, liquid)

Indicator	Standard	Specification
Colour, Saybolt	ASTM D156 ASTM D1500	-10.0 2.0
Melting temperature, °C, min.	–	55.0
Density at 20°C, g/cm3, min.	–	0.810
Kinematic viscosity, mm2/s	–	4.5 – 7.5
Refractive index at 70°C, max.	–	1.4600
Water mass content, %	–	Traces
Mechanical impurities content, %, max.	–	0.006

Ceresin (briquettes, liquid)

Indicator	Standard	Specification
Colour, Saybolt	ASTM D156 ASTM D1500	-16.0 4.8
Melting temperature, °C, min.	–	75.0 – 80.0
Penetration at 25°C, 0.1 mm, max.	–	18
Mechanical impurities content, %, max.	–	0.02
Water mass content, %	–	None
Ash mass content, %, max.	–	0.02
Acid number, Mg KOH/1 g, max.	–	0.06
Water-soluble acids andalkalis content, %	–	None

Crude paraffin (liquid)

Indicator	Standard	Specification
Colour, Saybolt	ASTM D156 ASTM D1500	-16.0 2.8
Melting temperature, °C, min.	–	30.0
Oil lubricant content, %	ASTM D721	8.00 – 40.00
Kinematic viscosity, mm2/s	–	4.5 – 7.5

Paraffin softener JAPP (briquettes, liquid)

Indicator	Specification
Appearance	The crystalline mass. Tints from light brown to dark brown are permissible
Pour point, °C, min.	60.0
Acid number, Mg KOH/1 g, max.	0.05
Sulfur mass fraction, %, max.	0.3
Water-soluble acids andalkalis content, %	None
Water mass content, %	Traces
Mechanical impurities content, %, max.	0.1

Petrolatum-1 (briquettes, liquid)

Indicator	Specification
Colour, Saybolt	Light brown
Pour point, °C, min.	60.0
Kinematic viscosity at 70°C, mm2/s, min.	12.00
Oil lubricant content, %	4.5 – 7.5
Melting temperature, °C, min.	65.0
Water mass content, %, max.	0.2
Sulfur mass fraction, %, max.	0.25
Mechanical impurities content, %, max.	0.05
Flashpoint, °C, min.	200

Petrolatum-2 (briquettes, liquid)

Indicator	Specification
Colour, Saybolt	Light brown
Pour point, °C, min.	58.0
Acid number, Mg KOH/1 g, max.	0.1
Water-soluble acids andalkalis content, %	None
Water mass content, %, max.	1.0
Sulfur mass fraction, %, max.	1.0
Mechanical impurities content, %, max.	0.05
Phenol content	None
Flashpoint, °C, min.	220
Penetration, 0.1 mm, max.	70

Paraffins

Technical paraffins is used in different industry sectors, like for the manufacture of domestic chemistry products, e.g. candles, also in other sectors of industry.

Paraffin Technical

Parameter, Unit	Standard
Appearance	White colour crystal mass; grey and yellowish tints are permissible
Oil mass content, %, max	1,80
Melting temperature, °C, min	52,0 – 58,0
Colour, relative sorts, max	11
Mechanical admixtures content	None
Water soluble acid and alkaline content	None
Water mass content, %, not more than	–

NS technical paraffin is widely used as a binding material for the production of wood fiber panels, also for matches, indoor and outdoor candles, as well as in other branches of industry.

Paraffin Technical clear 1

Parameter	Standard
Appearance	Crystalmass from light yellow to light brown color; grey tints are permissible
Melting temperature, °С	42
Oil mass content, %,	5
Water content, %	None
Density at 20 °С, g/cm3	–

Paraffin Technical clear 2

Parameter	Standard
Appearance	Crystalmass from light yellow to light brown colour; grey tints are permissible
Melting temperature, °С	42
Oil mass content, %,	5
Water content, %	Traces

Paraffin Technical clear 3

Parameter	Standard
Appearance	Crystalmass from light yellow to light brown colour; grey tints are permissible
Melting temperature, °С	42
Oil mass content, %,	5
Water content, %	None
Colour, Saybolt, ASTM D1500, max.	1,0

Paraffin masses

Paraffin masses are used for production of outdoor and grave candles.

Product name	Melting temperature,°C	Oil Content, %	Kinematic Viscosity, mm2/s	Colour, Saylbolt	Penetration 0,1 mm
Paraffin 1B **	50.0 – 59.0	1.0 – 1.8	3.5 – 5.2	+28 – +30	18 – 33
Paraffin 3B **	50.0 – 59.0	2.0 – 5.0	3.4 – 5.5	+27 – +30	30 – 50
Paraffin 5B **	50.0 – 56.0	4.0 – 7.0	3.3 – 5.2	+25 – +28	40 – 60
Paraffin 7B **	50.0 – 57.0	6.0 – 15.0	4.0 – 6.5	+23 – +26	40 – 70
Paraffin 20B **	50.0 – 65.0	8.0 – 15.0	4.0 – 8.0	+20 – +23	60 – 120